run show igmp-snooping querier
The run show igmp-snooping querier command shows the configuration information and status of the querier in a VLAN.
Command Syntax
run show igmp-snooping querier vlan <vlan-id>
Parameter
Parameter | Description |
vlan <vlan-id> | Optional. Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094. |
Example
Show the configuration information and status of the querier.
admin@XorPlus# run show igmp-snooping querier vlan 1
Vlan 1: IGMP switch querier status
--------------------------------------------------------
admin state : Disabled
admin version : 2
source IP address : 0.0.0.0
other querier timer : 1
operational state : Non-Querier