set protocols igmp-snooping vlan-id querier address

set protocols igmp-snooping vlan-id querier address


The set protocols igmp-snooping vlan-id querier address command configures the source IP address of the general query message and group-specific query message sent by the querier.

 

Command Syntax

set protocols igmp-snooping vlan-id <vlan-id> querier address <querier-address>

 

Parameter

Parameter

Description

vlan-id <vlan-id>

Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094.

querier address <querier-address>

Specifies a source IP address. The value is in dotted decimal notation. The default value is 0.0.0.0.

 

Usage Guidelines

After the Layer 2 device enables the querier function, you can run this command to configure the source IP address of the general query message and group-specific query message sent by the querier.

 

Example

  •   Configure the source IP address of the general query message and group-specific query message sent by the querier.

 

admin@XorPlus# set protocols igmp-snooping vlan-id 2 querier address 192.168.10.2 admin@XorPlus# commit

Copyright © 2026 Pica8 Inc. All Rights Reserved.