How to check whether the VLAN configuration on the two peer-link ports are consistent?

How to check whether the VLAN configuration on the two peer-link ports are consistent?


Any MLAG VLAN and non-MLAG VLAN traffic MUST be allowed on MLAG peer-link. Therefore, the VLAN configurations of the peer-link ports on both ends must be consistent. Run the run show vlans command on the MLAG peer devices to check the VLANs of the peer-link port.

 

For example,

admin@PICOS# run show vlans

VlanID  Vlan Name           Tag        Interfaces

------  ------------------  --------   ------------------------------------------------------

1                           untagged   xe-1/1/1, xe-1/1/2, te-1/1/2, xe-1/1/3, te-1/1/3

                                               xe-1/1/4, te-1/1/4, xe-1/1/5, te-1/1/5, xe-1/1/6

                                               te-1/1/6, te-1/1/7, te-1/1/8, te-1/1/9, te-1/1/10

                                               te-1/1/11, te-1/1/12, te-1/1/13, te-1/1/14, te-1/1/15

                                               te-1/1/16, te-1/1/17, te-1/1/18, te-1/1/19, te-1/1/20

                                               te-1/1/21, te-1/1/22, te-1/1/23, te-1/1/24, te-1/1/25

                                               te-1/1/26, te-1/1/27, te-1/1/28, te-1/1/29, te-1/1/30

                                               te-1/1/31, te-1/1/32, te-1/1/33, te-1/1/34, te-1/1/35

                                               te-1/1/36, te-1/1/37, te-1/1/38, te-1/1/39, te-1/1/40

                                               te-1/1/41, te-1/1/42, te-1/1/43, te-1/1/44, te-1/1/45

                                               te-1/1/46, te-1/1/47, te-1/1/48, ae1

                            tagged

 

2       default       untagged   te-1/1/1

                            tagged      xe-1/1/3

 

3                         untagged

                           tagged      xe-1/1/3

 

 

 

Copyright © 2026 Pica8 Inc. All Rights Reserved.