Configuration Notes and Constraints of MoD

Configuration Notes and Constraints of MoD


When you configure MoD, pay attention to the following notes:

  • MoD is only supported on Tomahawk4, Tomahawk5, and Trident4-X9 platforms.

  • The Trident4-X9 platform supports both ware-flow mode and unware-flow mode. The platforms of Tomahawk4 and Tomahawk5 support only unware-flow mode.

  • When you configure the flow quintuple, pay attention to the following notes:

    • If the configured protocol is not TCP or UDP, the configured source port and destination port are invalid.

    • If you configure different flows with partially identical quintuple configurations, the flow with finer granularity quintuples has the higher priority. For example, if the source IP addresses of two flows are the same, the flow with other quintuple configurations has the higher priority.

  • When you configure the export information for dropped packets, pay attention to the following notes:

    • Only one destination address can be configured. When you configure multiple addresses, the error prompts appear.

    • For the management interface eth0 cannot mirror packets, you cannot configure its IP address as the source IP address to communicate with the remote collector (destination address). Besides, you cannot configure the IP address of a LAG interface as the source IP address.

    • The source IP address and source port must be configured. The destination port is optional, and its default value is 4739.

Copyright © 2026 Pica8 Inc. All Rights Reserved.