Overview of Optical Module Monitoring
Overview
The Optical Module Monitoring feature provides visibility into the status and performance of the optical modules inserted on the switch. It helps users monitor module status, detect faults, and read or modify module parameters to ensure stable link operation. The specific supported functions are as follows.
Port link-up time monitoring
You can view the time interval between inserting the optical module and establishing the link connection. For more details, seehttps://pica8-fs.atlassian.net/wiki/spaces/PicOS45/pages/516620289.
Port alarm status monitoring (DDM)
You can monitor parameters of the optical module and generate alarms when parameter values exceed thresholds. For more details, seehttps://pica8-fs.atlassian.net/wiki/spaces/PicOS45/pages/494600208.
Optical module register information reading
You can read data from or write data to Electrically Erasable Programmable Read-Only Memory (EEPROM) via the sysfs interface. For more details, seehttps://pica8-fs.atlassian.net/wiki/spaces/PicOS45/pages/516587521.
Repeated laser toggling (on/off) for optical modules
You can toggle (on/off) the laser for optical modules by writing data to the EEPROM via the sysfs interface. For more details, seehttps://pica8-fs.atlassian.net/wiki/spaces/PicOS45/pages/516587521.
Single-byte repeated reading of optical module registers
You can read single-byte data from the EEPROM via the sysfs interface. For more details, seehttps://pica8-fs.atlassian.net/wiki/spaces/PicOS45/pages/516587521.
Optimal parameter scanning for transmit-side pre-emphasis and swing values on the electrical interface
You can scan and determine optimal transmit-side pre-emphasis and output swing parameter values on the electrical interface. For more details, seehttps://pica8-fs.atlassian.net/wiki/spaces/PicOS45/pages/516587521.
Optical module register field reset
You can reset the optical module register field. For more details, seehttps://pica8-fs.atlassian.net/wiki/spaces/PicOS45/pages/516587521.